FAQ ’ s

So they call usually electric and bulky devices which force air through a motor or fan and that deshumidifican the environment, since they condense moisture and send it to a warehouse. They do not control the humidity.

Dehumidifiers are designed to lower the moisture content. These devices often work under the principle of refrigeration. The devices include a radiator (tubular) through which passes a compressible fluid. Allowing the fluid to expand, fluid quickly lower the temperature of the pipes.

When moist air passes through the pipes, condensation takes place in tubes formed by water dripping on a removable container. Periodically removed and the container is emptied. With much frequency the dehumidifier is forgotten, is overflowing on the soil and the water is evaporated, returning to raise the humidity.

Bags, bags or canisters (according to size) containing an element or mixture of various elements able to remove moisture, working in atmospheres even up to 40% RH.

The desiccants have been used to completely remove moisture from the air as dejan moisture at or near zero percent.
Them desiccant have their use and application in the protection of the goods against the humidity. The desiccants are incorporated des's in individual cases where the object is to protect or even in containers used for transport of up to 20 or 40 feet. The content can be only Silica Gel or mixtures of natural clays, hygroscopic salts and thickeners.

They are passive devices that contain calcium chloride, which is a hygroscopic solid salt and what to the adsorb moisture from the atmosphere, salt into liquid state. Normally the liquid is guided to another compartment where it accumulates and stays.

Calcium chloride adsorbed moisture above HR > 60% up to the optimum humidity of 50-60%, this is the argument that differentiates an anti-moisture. Devices Naturonia® moisture avoid excess moisture which is not comfortable for people and preserve the conditions in which the growth of fungi and other microorganisms that cause unpleasant odours is generated.

According to the Royal Decree 1826 / 2009 November temperature max comfort in public places has to be 21 ° C and the minimum is 26 ° C and relative humidity (HR) must be between 30-70%.

Because they are devices that work independently and without input of energy because they do not require electricity or batteries. The absorption not has place for ventilation forced from the air, but the absorption has place in static. This means that moisture is captured and absorbed by hygroscopic salt.

Dehydrated calcium chloride, is a so-called hygroscopic salt, because it has much affinity for moisture to return to its hydrated State, also when saturated salt becomes a liquid at State steam. You can absorb its weight in moisture, even exceed it.

Because calcium chloride adsorbed moisture only above HR > 60% up to the optimum degree of moisture for the people which is 50-60%. For example, silica gel is of the family of the desiccant because it absorbs to leave the environment at levels of about 0%.

Because chemical salts calcium chloride is the salt of greater capacity.

Because the user knows when it has gone solid has to replace unlike other salts which hydrate and maintained in solid state.

Calcium chloride is one of the salts that absorbs up to 100% of its weight in moisture. This means that 250g of solid calcium chloride will a dissolution once exhausted of as at least 500g of which are used initial salt 250g and 250g of water that was in the environment.

By the same reasoning, if used 450 g granules, we will finish considering device about 900 g of dissolution of which 450 g will be salt and 450 g will have been eliminated from the environment.

In addition, avoid excess moisture which is not comfortable for people and preserve the conditions in which the growth of fungi and other microorganisms that cause unpleasant odours is generated.[1]

Devices moisture Naturonia® create a comfortable for people because not lower moisture below the moisture of comfort because they do not absorb levels of less than 60% RH.

To absorb excess moisture, prevents condensation on surfaces of materials and objects, avoiding the damage that would cause this condensation in these materials.

It avoids the formation of mold and mites that are allergens.

Avoid smells musty and closed and poorly ventilated space. Don't be fooled by arguments that remove odors, calcium chloride can not absorb annoying odor causing molecules.
Avoid stains of moisture in walls and objects.
Prevents corrosion of materials usually generated by the phenomenon of corrosion caused by condensation.

[1] According to the Royal Decree 1826 / 2009 November temperature max comfort in public places has to be 21 ° c and the minimum is 26 ° C and the relative humidity (HR) must be between 30-70%.

Anti-moisture products tend to be plastic boxes with two compartments. Calcium chloride, which is in contact with the air ´humedo is housed in the upper Chamber. Calcium chloride with the humidity form one dissolution liquid saline It is highly irritating and corrosive and can cause spots on the surfaces which come into contact with the dissolution.

The saline solution It falls by gravity to another compartment where it accumulates. The quantities of saline solution that can accumulate in these products anti-moisture depend on the quantity of calcium chloride and the purity of this. It is common that the amount of saline solution is among about 200 ml (0.2 l) and 1,000 ml (1 l.) or even more.

When calcium chloride is finished, the product reaches the end of its useful life. Then, the user must proceed with emptying of the saline solution and to put a new replacement of calcium chloride.

You must throw it down a drain in your home, now, during the handling of the saline solution the user may suffer irritation by splashes of the dissolution to the skin, spills and therefore stains.

Anti-moisture products are used in high places of cabinets or mobile locations of boats and caravans. If during the use of the moisture that may accumulate up to 1 litre of solution container, breaks or is damaged, the saline solution It can cause damage and stains in the environment. In addition, children, pets may also suffer damage and irritation if they come into contact with the saline solution.

In the market there are several products that try to solve the described problem.

• Non-reusable damp-proofing systems and that at the end of its use have been throwing the entire system with liquid inside.
• Alert solutions salinas continue absorbing humidity and if devices are not thrown away can overflow and damage the surfaces with which come into contact.
• Bag, a single compartment, gelling agents mixed with calcium chloride. The process of manufacture of these products is such that not sealed sufficiently well welds, and market bags have been found with this defect and have loss of saline solution. Complaints from users can be found in Blogs and on social networks. In addition, these systems do not allow to know when product anti-moisture has been exhausted.
• Other product has a patented design of "waterproof" case where we gather the saline solution.

None of these alternatives has the necessary mechanisms to avoid, that, in any event, during the life of the moisture, the plastic box containing the dissolution, can break or be damaged and that the saline solution exit abroad causing damage commented.

When the absorbent is over, the user, is also exposed to splashes of dissolution during the process of emptying of the container up to 0.5 litres of saline solution.

Use the patented Naturonia® technology.

The new product of Naturonia^® It will absorb the excess of humidity through the already known calcium chloride moisture absorption capacity. Formed dissolution drops will fall by gravity on a bag trap (trap in English) which has a formulation of natural products that will transform into a solido-gel. In this way the new system anti-moisture has confined the saline solution in a confined solido-gel or trapped according to the following picture.

In addition, the user can see how consumed calcium chloride to recharge or replace the system again with a replacement kit formed by a bag of absorbent and a solid-gel agent to trap the dissolution. It is through technology gel natural products that we trap the irritant dissolution.

When product moisture reaches the end of its useful life, the user who has used the current market product must dismantle the anti-moisture and pulling the dissolution with care not be splashing and not to soil the place where shoots, while the user who used Naturonia® moisture, will have to dismount the anti-moisture and pull the bag solid-gel waste as if it were a hygienic product type "honeycomb".

Naturonia® has developed, patented and marketed a new system anti-moisture, which eliminates the risk of having to handle irritating liquids in home and mobile environments, such as caravans, auto Caravan and boat dissolutions, quesu design allows the user to know when to change the absorbent because they have reached the end of its useful life.

The little bags of silica gel orange as an indicator, protect objects and materials and guarantee the levels of humidity close to 0%.

The color change indicates that it is depleted.

You can choose between repornerlo for another bag of Naturonia or reactivate it yourself. You must remove the grain of the tea bag and put it in a bowl in the microwave (not) at 110 ° C for 1 hour. When you return to its orange color grain can be used in your drawer. If you can replace to seal the bag.

After each reactivation granulate loses efficiency, so we recommend you not reactive silica over 6 times.

There is no risk of loss of liquids.